Shannon, Ireland, 24 October 2022 – Mincon Group plc has unveiled its next-generation DTH hammer range that will be available starting in 2023. The product range is centred around high-efficiency DTH hammers that combine class-leading penetration rates with proven energy savings that will help customers reduce their drilling costs and carbon emissions.

 

Mincon’s MP-series is the company’s next generation of DTH hammers. It starts with the MP30, a 3-inch-class hammer that can be equipped with drill bits between 85 mm (3.4″) and 105 mm (4.2″), and tops out with the MP400, a 40-inch-class hammer for large-diameter drill bits between 1000 mm (39.4″) and 1524 mm (60″).

 

The complete range:

3-inch-class hammers: MP30, MP35, MP36

4-inch-class hammers: MP40, MP4H

5-inch-class hammers: MP50, MP56

6- and 7-inch class hammers: MP60, MP65, MP6H, MP70

8- and 9-inch class hammers: MP80, MP8H, MP90

10- and 12-inch class hammers: MP100, MP120

Large-diameter hammers (15 to 40-inch): MP150, MP180, MP240, MP340, MP400

Shanks for all applications

When it comes to support for drill bits, Mincon’s MP-series of DTH hammers offers unparalleled versatility and compatibility. Each hammer model supports the industry-standard shanks for its size class. Additionally, Mincon offers hammer variants that support drill bits without a footvalve (also known as tubeless drill bits). Drillers may prefer to use drill bits that have no footvalve depending on ground conditions and also for reliability reasons.

New arrivals

Included in this comprehensive range are two all-new models to bolster the large-diameter range: the MP150 and MP400; both of which have been designed to deliver efficient performance for piling and foundation drilling.

Efficient performance

Since launching its first DTH hammer design in the 1980s, Mincon’s ethos of continuous improvement has seen its product range evolve and grow. Mincon’s technical experts work closely with drillers to get feedback from work sites, which the engineering, manufacturing, and customer support teams use for the ongoing development of new models.

 

Mincon manufactures all models in the MP-series of DTH hammers at its state-of-the-art facilities in Ireland and Finland. With ownership of the manufacturing and heat-treatment processes, Mincon is able to ensure that each DTH hammer is built to deliver the most reliable and efficient performance.

 

The 2023 DTH hammer range offers a comprehensive selection of models for all ground conditions and applications. When used with other products in Mincon’s range, including DTH drill bits, drill pipe, and associated accessories, customers will benefit from next-generation drilling technologies that improve penetration rates without compromising on efficiency, while reducing emissions and drilling costs.

 

Joe Purcell, CEO, Mincon Group, said:

“I’m immensely proud of the work our engineers and product teams have done to bring a comprehensive DTH hammer range to market. Thanks to decades of fine-tuning our manufacturing processes and product designs, these next-generation hammers will offer customers real-world cost savings and higher productivity.”

Latest news

Introducing Mincon Adaptive Control: putting drillers in command

Introducing Mincon Adaptive Control: putting drillers in command

Introducing Mincon Adaptive Control: putting drillers in command

Mincon Adaptive Control (MAC) upgrades Mincon mast attachments with integrated hydraulics, software and a digital remote for precise, repeatable drilling.

How To Pick The Right Drill Mast Integration For Your Project

How To Pick The Right Drill Mast Integration For Your Project

How To Pick The Right Drill Mast Integration For Your Project

Learn how geology, terrain and site space shape drill mast selection for solar pre-drilling, when single-pass drilling pays off, and how M1 and M2 masts compare.

Solar Isn’t Going Away: A Golden Opportunity for Contractors

Solar Isn’t Going Away: A Golden Opportunity for Contractors

Solar Isn’t Going Away: A Golden Opportunity for Contractors

US utility-scale solar is booming. See how Mincon drill mast integrations help contractors pre-drill, drive piles and install ground screws in any ground.

On Site With Mincon

On Site With Mincon

On Site With Mincon

See how Mincon’s regional teams deliver hands-on drilling support worldwide — from casing systems in Brazil to bit-sharpening in Senegal.

Social Impact at Mincon

Social Impact at Mincon

Social Impact at Mincon

Discover how Mincon teams support communities worldwide — from school uniforms in Namibia to youth sport sponsorship in Papua New Guinea.

Mincon 101: How Do Casing Systems Work?

Mincon 101: How Do Casing Systems Work?

Mincon 101: How Do Casing Systems Work?

Casing systems are constantly being used in ground drilling, but what makes them so useful? Learn their mechanics and the importance of air control here.

Optimising Hammer Efficiency in Blast-Hole Drilling

Optimising Hammer Efficiency in Blast-Hole Drilling

Optimising Hammer Efficiency in Blast-Hole Drilling

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

On The Road With Mincon

On The Road With Mincon

On The Road With Mincon

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

icon
icon
Introducing Mincon Adaptive Control: putting drillers in command

Introducing Mincon Adaptive Control: putting drillers in command

Introducing Mincon Adaptive Control: putting drillers in command

Mincon Adaptive Control (MAC) upgrades Mincon mast attachments with integrated hydraulics, software and a digital remote for precise, repeatable drilling.

How To Pick The Right Drill Mast Integration For Your Project

How To Pick The Right Drill Mast Integration For Your Project

How To Pick The Right Drill Mast Integration For Your Project

Learn how geology, terrain and site space shape drill mast selection for solar pre-drilling, when single-pass drilling pays off, and how M1 and M2 masts compare.

Solar Isn’t Going Away: A Golden Opportunity for Contractors

Solar Isn’t Going Away: A Golden Opportunity for Contractors

Solar Isn’t Going Away: A Golden Opportunity for Contractors

US utility-scale solar is booming. See how Mincon drill mast integrations help contractors pre-drill, drive piles and install ground screws in any ground.

On Site With Mincon

On Site With Mincon

On Site With Mincon

See how Mincon’s regional teams deliver hands-on drilling support worldwide — from casing systems in Brazil to bit-sharpening in Senegal.

Social Impact at Mincon

Social Impact at Mincon

Social Impact at Mincon

Discover how Mincon teams support communities worldwide — from school uniforms in Namibia to youth sport sponsorship in Papua New Guinea.

Mincon 101: How Do Casing Systems Work?

Mincon 101: How Do Casing Systems Work?

Mincon 101: How Do Casing Systems Work?

Casing systems are constantly being used in ground drilling, but what makes them so useful? Learn their mechanics and the importance of air control here.

Optimising Hammer Efficiency in Blast-Hole Drilling

Optimising Hammer Efficiency in Blast-Hole Drilling

Optimising Hammer Efficiency in Blast-Hole Drilling

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Social Impact at Mincon: Supporting Communities Across Our Global Teams

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

On The Road With Mincon

On The Road With Mincon

On The Road With Mincon

Mincon’s M1 & M2 Series is a drill mast attachment for solar EPCs – pre-drill refusal zones, drive piles, and install ground screws on any carrier.

icon
icon